Contact us
Contact us
  • Tel:0577-67470303
  • Fax:0577-67410975
  • E-mail:a@wzdelong.com
  • Address:16-18 Zhoushan Road Anfeng Industrial Zone,Oubei Yongjia County,Zhejiang
The current position:Home > Vacuum sintering furnace > DL-GL-ME200 Vacuum Defoaming Feeding Tank
DL-GL-ME200 Vacuum Defoaming Feeding Tank
  • DL-GL-ME200 Vacuum Defoaming Feeding Tank

  • product description
  • Product Brief
     DL-GL-ME200 vacuum defoaming supply tank is an indispensable stirring device in the industrial production process of sealants. The equipment can also be widely used for stirring and vacuuming of silica gels and special high-viscosity adhesives. The equipment is widely used in chemical, pharmaceutical, daily chemical and other industries. The working principle of the machine is that when the material is stirred in the barrel, the barrel body is evacuated by the vacuum pump, so that the air inside the barrel is continuously discharged during the mixing process, so that there is no air bubble inside the material.
     Widely used in vacuum pumping in chemical and pharmaceutical industries such as fine chemicals, chemical fibers, intermediates, APIs, cephalosporins, biopharmaceuticals, fine chemicals, etc.

    Features 
    1) The motor adopts Y series three-phase asynchronous motor with a voltage of 380V and a power of 1.1kw.
    2) The barrel is a double-layer stainless steel barrel with heating function. The net volume of the barrel is 100L. It is made of SUS304 stainless steel. The inner and outer surfaces of the barrel are mirror-polished to facilitate cleaning.
    3) The upper cover of the barrel body is made of arc head, the material is SUS304 stainless steel, and it is polished. The upper cover is installed with the inlet, exhaust port, sight glass hole and integrated spotlight, safety valve, positive and negative pressure gauge, etc. .
    4) The bottom of the barrel is conical and forms an angle of 105?? with the barrel to ensure that the bottom of the barrel is completely unloaded and there is no dead angle.
    5) The agitator shaft and agitator are made of SUS304 stainless steel, the agitator speed is 0-120r/min, and the frequency is adjusted.
    6) The electric heating tube has a voltage of 380V and a power of 2KW/piece, a total of 2 pieces. The heating tube is made of stainless steel. The temperature of the slurry and the heat transfer medium (water) are displayed and the temperature can be automatically controlled.
    7) The double-layer liner interlayer is equipped with a water level sight glass, which is convenient for observing whether the thermal insulation water level is sufficient.
    technical parameter
    1. Product model DR-GL-ME100
    2. Tank container 100L
    3. Slurry treatment ??80L
    4. Heating and holding temperature -80??
    5. Heating form: inner water circulation + heating rod
    6. Tank material All machine parts food grade stainless steel
    7. Stirring speed 0??120 revolutions/min (stepless speed regulation under no load)
    8. Stirring motor 380V/1.1KW explosion-proof motor
    9. Remarks: The interface of the feed tank is unified with 1" quick-connect chuck, which is convenient for disassembly and replacement
    10. One tank automatic cleaning ball (spray type), used to remove the adsorbed slurry on the inner wall.

Copyright © Zhejiang Dron Science Teaching Equipment Co.,Ltd   
Inquiry
XML 地图 | Sitemap 地图